RetroPrinter Support

So here are the pictures of how I attached a small diode and a piece of wire between GPIO pin 1 on the bottom of the Raspberry Pi 3B+ and GPIO pin 1 on the top of the RetroPrinter. Note that I have cut into the connector on the bottom of the RetroPrinter, to break the pin 1 connection. Everything ...

Sounds like someone is getting a little confused with Raspberry Pi model names and versions. The Raspberry Pi 3B+ was released on March 14th 2018 (Pi day). The distinctive features of the 3B+ are the metal heatsinks covering the CPU and the Wifi chip. The version number for the 3B+ is V1.3. Anything ...

After trying several different images, Rapberry Pis and microSD cards, I'm convinced that the Pi 3B+ fails to boot because of a hardware issue.

I've always been convinced that this was a hardware issue, so I decided to build a test rig using an Adafruit T-Cobler Plus and an Adafruit Cobler Plus. I ...

With the ReproPrinter attached to a Raspberry Pi 3B+, the Raspberry Pi fails to boot. The power light (red) on the Raspberry Pi is on, but the activity light (green) doesn't do anything. It should flash, to show I/O activity on the MicroSD card.

The rainbow screen isn't displayed, the screen is ...

Hi everyone

I'm very happy with my RetroPrinter. I can now use it to print BASIC listing from my BBC Micro (Model B). I'm using RetroPrinter with a Raspberry Pi 3B+ and printing to a Canon MG7550 network printer.

Well done to everyone who's made this possible.

David