RetroPrinter is working great with my ATS-1 !
Posted: Sun Oct 27, 2019 12:33 pm
Hi,
I would like to thank you Rich for his great little device and his great support!
The first delivery seemed to be lost somewhere between UK and Germany, so Rich sent out a new delivery to me without any further issues.
His second delivery arrived 4 days after then.
Setting up the RetroPrinter to work together with my Audio Precision ATS-1 Audio Test System was no big issue thanks to the great manual.
I configured the software to print the PCL data from the ATS-1 via ghostscript into pdf files and access them via WLAN & AFP from my Mac.
It is working great as you can see on the attached pictures.
I highly recommend the RetroPrinter and its software, which is running flawlessly on my Pi 3B.
Cheers
Jochen
I would like to thank you Rich for his great little device and his great support!
The first delivery seemed to be lost somewhere between UK and Germany, so Rich sent out a new delivery to me without any further issues.
His second delivery arrived 4 days after then.
Setting up the RetroPrinter to work together with my Audio Precision ATS-1 Audio Test System was no big issue thanks to the great manual.
I configured the software to print the PCL data from the ATS-1 via ghostscript into pdf files and access them via WLAN & AFP from my Mac.
It is working great as you can see on the attached pictures.
I highly recommend the RetroPrinter and its software, which is running flawlessly on my Pi 3B.
Cheers
Jochen